Bronze Mermaid Pond & Pool Spitter

The Bronze Mermaid Pond & Pool Spitter will create a whimsical accent to any pond or pool setting. This 'pond spitter' is made of real brass, and will last so long it'll become an heirloom. Whether it's used as statuary or as a fountain, this accent will bring a playful touch to your outdoor space. If you don't already have a pond or pool feature in your yard, why not consider purchasing a prefabricated pond/pool and create your own personal oasis of peace and tranquility. Available in two different sizes.

Brass will not rust or decay over time. It will become more and more beautiful with age, as they are exposed to the elements- even salt water.

A 90 gph water pump kit is recommended for use with small spitter and 200 gph water pump kit is recommended for use with large spitter (not included, sold separately).

NOTE: This fountain includes special ordering instructions. Please read the 'Special Ordering Instructions' section above before placing an order.

1. This fountain sculpture is plumbed with copper tubing with a hose barb welded to the tubing at the bottom of the sculpture.
2. The receptacle to hold water (not included) can be any non-porous material large enough to receive the water emitting from the fountain sculpture.
3. A submersible, recirculating pump (sold separately) draws the water from the pump submerged in the receptacle through a plastic hose attached to the hose barb on the fountain sculpture. The water runs through the copper tubing inside the sculpture and flows back into the receptacle, thus providing a continuous flow of recirculating water. The pump's electrical cord is plugged into a grounded 3-prong outlet.

• Made of real brass
• Can be used as statuary or as a fountain
• Available in two sizes
• Lift Gate Service suggested

• Pump not included, sold separately