About Fountain Pumps

When purchasing a fountain, you will discover that the pump is by far the most important aspect. While it is the body of your water fountain that provides the beauty, the fountain water pump provides the sound and motion and prevents algae and other bacteria from building up in your fountain. In the next few paragraphs, we will take a deeper look at these pumps in order to help you better understand how they work and why their proper maintenance is so crucial to your fountain.

If you are looking to purchase a new fountain, you will want to ensure that it is a good fit for your fountain. This means paying attention to the height of the head, or the distance between the fountain’s basin and the point where water is discharged. You want to ensure that the head on your fountain water pump is higher than the height of the fountain. Water flow is also important, as you will want to ensure that you want 100 gallons of water per hour for every inch of width of the stream of water your fountain produces. Smaller pumps are required for indoor fountains to prevent splashing.

If your pump is showing problems, there are certain things you can examine before you rush to replace it. Always take time to clean the pump and remove any debris from the tubing as well as to remove buildup with a toothbrush. You also want to make sure that the water level in your fountain is high enough for the fountain pump to work. Make certain that the tubing is connected to the pump. Low water levels can cause the pump to make strange noises, while high water levels can cause overflowing. A small rubber kitchen mat can eliminate vibrating caused by the pump making contact with the basin.

Another common problem for water fountain pumps is tubing that does not fit properly. If the tubing is too small, simply place the end in boiling water for a short time and place it over the tube outlet while it is still warm. Upon cooling, it will shrink to form a watertight seal. If the tubing is too large, purchasing a small screw clamp can hold it tightly in place. In short, most fountain problems can be alleviated at home without the need for repairs. The key is to figure out the problem and to take the steps needed to prevent it occurring again in the future. Maintenance is certainly the key to a long lasting fountain.

Share Your Comments & Feedback: