1400 1/4HP Lake and Pond Aerating Fountain

Not only does the 1400 1/4HP floating, decorative aerating fountain improve the aesthetics of your pond or lake, but will also significantly enhance the natural life by reducing algae growth. The fountain comes complete with everything you need, including lights (if ordered), and is designed to be robust, dependable and easy to operate. The low power consumption of these fountains makes continuous operation affordable. This fountain comes with a choice of LED light ring or without.

The C-25, 120V Control with Timer, GFCI protection, and Photo Eye for light operation comes standard with the 1400 Floating Fountain. No electrician is required to install your C-25 Control or your 1400 Aerating Floating Fountain if an existing 120V, 15 amp receptacle is available.

• Osprey - produces a wide arch of water 3.5 feet high by 7 feet in diameter
• Condor - produces a two-tiered arch of water with an inner arch 4 feet high by 4 feet in diameter and an outer arch 2 feet high by 10 feet in diameter
• Falcon - produces a narrow arch of water 4 feet high by 4 feet in diameter
• Eagle's Nest - produces a wide "V" pattern of water 3.5 feet high by 10 fee in diameter
• Hawk's Nest - produces a narrow "V" pattern of water 3 feet high by 7 feet in diameter

• 1/4HP, 120V motor
• Will operate in as little as 12" of water
• Used to enhance the aesthetics and improve aeration of pond or lake
• Environmentally friendly, easy to operate
• Requires minimal maintenance
• Reduces algae growth by forcing cells into deeper water and limiting exposure to sunlight and helps to improve water quality
• Energy efficient and cost-effective
• ETL approved to UL and CSA standards
• Made with pride in the U.S.A.
• Warranty: Limited 2 years

• Motor
• Float with mooring ropes
• Fountain components with built-in screening
• Underwater rated 50' power cable
• C-25, 120 volt GFCI protected electrical control panel
• 5 interchangeable spray nozzles with patterns ranging from 4' tall to 10' wide